CAT D10 Large Dozer

Information

Additional information

Make	Caterpillar
Model	D10, D10R, D10T
Weight	70t

Equipment Overview

The Cat D10 is an large dozer built for high-production earthmoving and mining support, part of Caterpillar’s D1–D11 dozer range. It has 449 kW (602 hp) of net forward power, an operating weight of 70,256 kg with the standard SU ABR blade, dual tilt, and single-shank ripper fitted, and an 18.5 m³ blade capacity, suited to overburden removal, bulk earthmoving, and large-scale mine site production.

Power comes from the Cat C27 engine, offered in this Tier 4 Final/EU Stage V rating or a Tier 2 equivalent alternative, and delivers 20% more power in reverse than forward for faster cycle times. A three-speed electronic powershift transmission pairs with a stator clutch torque divider that automatically frees up under low load for higher drivetrain efficiency, while hydraulically applied multiple-disc steering clutches and spring-applied multiple-disc brakes handle directional control. Single-shank, single-shank deep, or multi-shank rippers are available for overburden and hard-material ripping.

Technical Specifications

Specification	Value
Engine	Cat C27, 27 L, turbocharged
Power Output	449 kW / 602 hp (net forward, SAE J1349/ISO 9249 @ 1,800 rpm); 564 kW / 756 hp net in reverse; a Tier 2 equivalent rating is also offered
Emission Standard	U.S. EPA Tier 4 Final / EU Stage V (Tier 2 equivalent also available)
Transmission	3-speed electronic powershift with stator clutch torque divider
Drive Type	Hydraulically applied multiple-disc steering clutches; spring-applied multiple-disc brakes
Operating Weight	70,256 kg (SU ABR blade, dual tilt, single-shank ripper, 610 mm ES shoes)
Max Travel Speed	12.5 km/h forward / 15.7 km/h reverse (3rd speed)
Blade Capacity	18.5 m³ (SU ABR blade, standard)
Blade Width	4,940 mm over end bits (SU ABR, standard)
Ground Pressure	≈145 kPa (calculated from published operating weight and ground contact area)
ROPS / FOPS	ISO 3471:2008 / ISO 3449:2005 Level II